LANDSCAPING PRODUCTS > Landscape Accessories > Paver Bond Adhesive
 
Paver Bond Adhesive is a quick curing, high strength, structural grade construction adhesive. It is water resistant and freeze-thaw stable. Adheres well to frozen and wet surfaces. Applies as an easy gun-grade mastic. Durable enough to withstand extreme wear and tear including heavy vehicular traffic. Naturally levels and shims. For exterior use only.
   
Paver Bond Adhesive
Product Code PBA
Coverage 10.2 fl. oz. cartridge:
1/8" bead = 103 linear feet
1/4" bead = 26 linear feet
Color Sand
Product Description Paver Bond Adhesive is a quick curing, high strength, structural grade construction adhesive. It is water resistant and freeze-thaw stable. Adheres well to frozen and wet surfacres. Applies as an easy gun-grade mastic. Durable enough to withstand extreme wear and tear including heavy vehicular traffic. Naturally levels and shims. For exterior use only.
Uses Pavers, Retaining Walls and Caps, Concrete, Coping Systems, Brick, Natural and Manufactured Stone, Slate. Also adheres to other building materials such as treated lumber, aluminum foil back sheathing, gypsum, fiberglass and composite decking materials.
Preparation Inspect substrate to be sure it is structurally sound with no spalling, cracking or scaling. Surface must be solid, clean, and free of dirt and oil for proper bonding. Before applying adhesive, inspect pavers or stone to ensure they are smooth, flat and of the same height. Ensure proper drainage so that water does not collect or drain into undesired areas.
Application Cut cartridge nozzles at 3/8" and puncture inner seal. Apply a 1/4" to 3/8" bead of Paver Bond to form an "S" shape on the bottom surface of the paver or stone. Run a bead around the edge a minimum of 1/2" from the edge. Set the stone in place and tamp the stone down gently with a rubber mallet to compress the adhesive.
Drying Time Adhesive starts to set within 20 minutes and should be in place within 10 to 15 minutes. Full cure can take at least seven days. The flammable portion of the adhesive evaporates as it cures and, when fully cured, is non-flammable and non-toxic.
Clean Up Use minerals spirits or chlorinated solvents.
Precautionary Info Extremely flammable. Harmful or fatal if swallowed. Toxic vapor harmful. Use in well ventilated area. Extinguish flames and igniters. Keep out of reach of children.
Locations Available Terre Haute, Vincennes, Washington
 
 
 

Copyright © 2011 [Jones & Sons, Inc.]. All rights reserved.