BUILDING PRODUCTS > Sealers / Liquid Products > Super Diamond Clear
 

SUPER DIAMOND CLEAR is a state-of-the-art curing and sealing compound specially designed to provide a quality cure and seal, while assuring total resistance to yellowing from ultraviolet exposure. This product is suitable for use on interior and exterior concrete surfaces. SUPER DIAMOND CLEAR has excellent bonding characteristics and forms a continuous, glossy membrane to make the surface resistant to dirt penetration and other staining. SUPER DIAMOND CLEAR is particularly suited for exterior architectural concrete where membrane yellowing is undesirable.

   
Super Diamond Clear
Product Code SDCG (1 Gallon); SDC5G (5 Gallon)
Features/Benefits
  • Provides a totally clear membrane for new concrete or old concrete
  • Seals all concrete surfaces, providing a glossy appearance and easier clean-up
  • Hardens new concrete by promoting a proper cure for improved abrasion resistance
  • Dustproofs concrete with tough durable film
  • Helps minimize spalling of exterior concrete
  • Compatible with many line striping paints, mastics and resilient floor coverings
  • Will not yellow under ultraviolet exposure
Coverage SUPER DIAMOND CLEAR is a slightly amber liquid.  After application and drying, SUPER DIAMOND CLEAR offers a clear, glossy film. Follow recommended coverage rates.

COVERAGE*
Coverage Rates ft2/gal
Purpose of                                               Optional
Application                First Coat           Second Coat

Curing and Sealing        300 - 400             400 - 450
New Concrete

Sealing and                  400 - 450             450 - 550
Dustproofing Old Concrete           

*Coverage rates assume hard troweled floors. Coverage will vary from the above rates depending on surface porosity and texture. AVOID EXCESSIVE BUILD-UP. THICKER APPLICATIONS MAY LEAD TO DISCOLORATION AND IMPROPER SEALER PERFORMANCE.
Surface Preparation The concrete surface must be clean and free of standing water. Remove any sealer or other material that may prevent adhesion of the SUPERDIAMOND CLEAR.
Application Apply at a uniform coverage by spray or roller application. Product must be sprayed with a high pressure pump-up sprayer equipped with a high solids nozzle, or with an airless industrial sprayer. If roller applied, use a short napped, solvent resistant sleeve.
Clean Up

Clean application tools and equipment with Aromatic Solvent.

Sizes Available 1 Gallon & 5 Gallon
Locations Available Terre Haute, Vincennes, Washington
Manufacturer's Website
 
 
 

Copyright © 2010 [Jones & Sons, Inc.]. All rights reserved.