PRIMARY APPLICATIONS
• Industrial floor slabs
• Parking garages
• Exterior pavements
• Warehouses
• Walls and columns
• Dry shake floors
• Concrete toppings
• Interior and exterior concrete surfaces
Apply at a uniform coverage by spray or roller application. Product may be sprayed with a hand held "pump-up" sprayer or with an airless industrial sprayer. If roller applied, use a short napped, solvent resistant sleeve.
Curing-For the best cure of freshly placed concrete, apply REZ-SEAL as soon as possible after finishing operations and/or immediately after the disappearance of the "sheen" of surface moisture.
Sealing-When sealing old concrete, the surface must be thoroughly clean and dry. Pressure washing with a strong alkaline detergent to remove dirt, waxes, and oil is suggested. Acids will not sufficiently clean or remove dirt, curing compounds, or old sealer from concrete. Worn or porous areas may need a second application for uniform seal and appearance. For best results, use SUPER REZSEAL or SUPER DIAMOND CLEAR for sealing old concrete. |
