 |
Restores look of new concrete as it stains and seals. New Look Sealer/Stain is a deep penetrating acrylic resin stain formulated to resist Hot-Tire Pick-up, cracking, chipping, peeling and mildew. It is semi-gloss and resists oils, detergents, acids, salts, and most chemicals. It dust-proofs and aids clean up.
Now available in Gray and Khaki Color! |
| New Look may be used on concrete, unpainted exterior surfaces, including patios, sidewalks, driveways, concrete tennis courts, and masonry walks. New Look may also be used on concrete interior surfaces such as garages, factory, and warehouse floors where good ventilation is available. Do not use near open flames, pilot lights, sparks, etc. |
|
| New Look Sealer/Stain |
| Product Code |
NLG5G (Gray Color -5 Gallon), NLK5G (Khaki Color - 5 Gallon) |
| Coverage |
One coat will be sufficient to seal and protect but two coats are recommended for best appearance. On smooth finished concrete, use 250 square feet per gallon on first coat and 300 square feet per gallon on second coat. Rough surfaces will take more. |
| Surface Preparation |
For New Concrete
Apply as soon as concrete can be walked on. New Look is a curing compound.
For Old Concrete
Clean dirt, wax, grease, oil and other contaminants from the surface. Be sure to remove any foreign coating. Make sure the surface is clean, dry and sound. Clean with Concrete Cleaner using a bristle brush. Flush well with water and allow to dry overnight. If surface is slick, etching with a diluted muriatic acid is recommended. |
| Application |
Stir New Look thoroughly before and during application. Apply only when surface and air temperatures are above 50 degrees F. Do not apply to excessively hot surfaces as rapid drying may cause trapped vapors to bubble. Apply evenly with short nap roller, brush or spray equipment. |
| Clean Up |
Clean application tools and equipment with Aromatic Solvent. |
| Sizes Available |
5 Gallon |
| Locations Available |
Terre Haute, Vincennes, Washington |
| Manufacturer's Website |
|
|
|
