| Eagle Exposed Agg Sealer - Clear |
| Product Code |
ECG (1 Gallon), EC5G (5 Gallon) |
| Coverage |
Exposed Aggregate - Apply at rate of 100 sq. ft. / gal. Aesthetically, not recommended for broom finished concrete. Trowel Finish - Apply at rate of 300 sq. ft. / gal. |
| Surface Preparation |
Concrete surface should be cleaned of visible dirt, oil, grease, and wax. Surface should be completely dry before applying coating. |
| Application |
Mix well. Apply evenly from can with brush or long nap roller. Dries to walk on in 3 hours to a glossy shine. May be driven on in approximately 24 hours. Cooler temperatures of 50 degrees F and below will increase drying time significantly. After drying completely, additional coats may be applied if higher gloss is desired. |
| Clean Up |
For cleaning product from rollers and brushes, use xylene or toluene. These solvents are flammable, proper caution should be exercised. |
| Sizes Available |
1 Gallon & 5 Gallon |
| Locations Available |
Terre Haute, Vincennes, Washington |
| Manufacturer's Website |
www.eaglesealer.com |
