BUILDING PRODUCTS > Sealers / Liquid Products > AccelGuard 80
 

ACCELGUARD 80 is an accelerating, water-reducing admixture for mortar that does not contain calcium chloride or added chloride ions. It improves certain properties of plastic and hardened mortar, provides benefits such as significant improvement in early stiffening and setting characteristics. ACCELGUARD 80 can be used in mortar which will be in contact with steel since it is completely free of materials that cause corrosion.
   
AccelGuard 80
Product Code AG805G (5 Gallon)
Primary Applications . Cold weather masonry work
. Stucco
. Brick laying
. Block and structural clay tile
Features/Benefits

. Accelerates mortar set time in cold weather
. Aids in protecting masonry mortar in cold weather
. Reduces job delays during cold weather
. Increases strengths at all ages
. Improves workability
. Completely non-corrosive with steel embedments

NOTE: This product does not protect plastic mortar from freezing. This product will allow the mortar to gain strength at a faster rate in cold weather. The mortar must achieve a minimum strength of 1000 psi (7 MPa) before exposure to freezing temperatures.
Sizes Available 5 Gallon
Locations Available Terre Haute, Vincennes, Washington
Manufacturer's Website
 
 
 

Copyright © 2010 [Jones & Sons, Inc.]. All rights reserved.